Installing A Drive Blank - Dell EqualLogic PS4100 Hardware Maintenance Manual

PS4100 Hardware Maintenance Guide Maintaining Drives
4. Push the drive completely into the slot (callout 2). The drive handle will begin to close onto the drive
(callout 3).
5. Push in the handle until you hear a click (callout 4).
Figure 11 Installing a 3.5-inch Drive
Verify that the new drive is operational by examining the LEDs on the front panel, as described in
Interpreting Drive LEDs on page 7. In addition, examine the GUI Member Disks window and the CLI
command output.
member select show disks

Installing a Drive Blank

1. Remove the bezel. See Removing the Bezel on page 2.
2. Insert the drive blank into the drive bay until the blank is fully seated.
3. Attach the bezel.
14