Cannot Launch Powervault Nx3500 Nas Configuration Utility; Multiple Errors Received During File System Format - Dell PowerVault NX3500 Administrator's Manual

Cannot Launch PowerVault NX3500 NAS
Configuration Utility
Description

Cannot launch PowerVault NX3500 NAS Configuration Utility.

Cause Probable causes maybe:
Workaround
Multiple Errors Received During File System
Format
Description
You receive multiple errors during a file system format.
Cause Probable causes may be:
• NAS Configuration Utility installer failed to install.
• JAVA runtime environment is not properly installed.
• Determine if the NAS Configuration Utility installer completed
successfully.
• Check to see if the minimum of JRE1.4x is installed successfully.
– On Microsoft Windows, run java -version from command
console to display a valid JRE version.
– On Linux, run java --version from terminal console to display a
valid JRE version.
• Wrong SAN IPs are used in the PowerVault NAS Configuration
Utility.
• Wrong IQNs used while defining hosts in the MDSM.
• Uneven number of LUNs are mapped to the host group.
• LUN size is below the minimum required size.
• Less than minimum number of required LUNs.
Troubleshooting
183