Accessing The Dr Series System Cli Commands - Dell PowerVault Storage Area Network Reference Manual

Table 1. Internal Drive Capacity and Available Physical Capacity
DR Series System Drive Capacity
3 TB (DR4100 system only)
2 TB
1 TB
600 GB
300 GB
For more information about the external data storage capacity supported by the addition of expansion shelf enclosures,
see the following sections in the
DR Series Expansion Shelf
•
DR Series System and Data Operations
•
Drive and Available Physical Capacities
•
NOTE: The DR4100 system ships with system software Release 2.0 or higher version installed. Any references in
this document to versions earlier than 2.0 would apply to DR4000 system configurations. Any enhancements made
to Release 1.x configurations are by default carried over into the 2.0 releases, and can be upgraded to the 2.0
Release version of the system software.

Accessing the DR Series System CLI Commands

To access the DR Series system CLI commands from the system CLI prompt, complete the following:
1. Launch a terminal emulation application and start the process for logging in to the DR Series system.
2. In Host Name (or IP address), type the host name or IP address for the DR Series system, and click Open.
3. At the system prompt, enter the username for the Administrator:
– Type administrator
– Press <Enter>
4. At the administrator password prompt, enter the password for the Administrator (the default is St0r@ge!):
– Type St0r@ge!
– Press <Enter>
The DR Series system administrator prompt is displayed.
5. At the administrator prompt, type help.
The DR Series system CLI commands are displayed.
administrator@mydr4000 > help
DR4000/DR4100 Help
alerts
authenticate
connection
container
diagnostics
Available Physical Capacity (Decimal)
26.79 TB
17.9 TB
8.89 TB
5.29 TB
2.47 TB
Dell DR Series System Administrator Guide :
Available Physical Capacity (Binary)
23.8 TiB
15.9 TiB
7.9 TiB
4.6 TiB
2.2 TiB
View system events and configure email notifications.
Configure Active Directory (AD) authentication.
Configure CIFS or NFS access to a container.
Configure a filesystem to share over CIFS or NFS.
Gather log information for support issues.
15