Advertise Dot3-Tlv - Brocade Communications Systems 1606 Reference

advertise dot3-tlv

Advertises to any attached device IEEE 802.3 organizationally specific Type, Length, Value (TLV).
Synopsis advertise dot3-tlv
no advertise dot3-tlv
Operands none
Defaults Advertise is disabled.
Command Protocol LLDP configuration mode
Modes
Description Use this command to advertise to any attached device IEEE 802.3 organizationally specific Type,
Length, Value (TLV). Use the no advertise dot3-tlv command to return to the default setting.
Usage There are no usage guidelines for this command.
Guidelines
Examples none
See Also advertise dot1-tlv, advertise dcbx-tlv, advertise optional-tlv
Converged Enhanced Ethernet Command Reference
53-1001762-01
DRAFT: BROCADE CONFIDENTIAL
5
advertise dot3-tlv
71