Advertise Dot1-Tlv - Brocade Communications Systems 1606 Reference

5

advertise dot1-tlv

advertise dot1-tlv
Advertises to any attached device IEEE 802.1 organizationally specific Type, Length, Value (TLV).
Synopsis advertise dot1-tlv
no advertise dot1-tlv
Operands none
Defaults Advertise is disabled.
Command Protocol LLDP configuration mode
Modes
Description Use this command to advertise to any attached device IEEE 802.1 organizationally specific Type,
Length, Value (TLV). Use the no advertise dot1-tlv command to return to the default setting.
Usage There are no usage guidelines for this command.
Guidelines
Examples none
See Also advertise dot3-tlv, advertise dcbx-tlv, advertise optional-tlv
70
DRAFT: BROCADE CONFIDENTIAL
Converged Enhanced Ethernet Command Reference
53-1001762-01