Dot1X Reauthmax - Brocade Communications Systems 1606 Reference

dot1x reauthMax

Sets the maximum number of times that a port attempts to reauthenticate.
Synopsis dot1x reauthMax number
no dot1x reauthMax
Operands number
Defaults The default number of times that a port attempts authentication is two.
Command Interface configuration mode
Modes
Description Use this command to set the maximum number of times that a port attempts to reauthenticate
before a port changes to the unauthorized state. Use the no dot1x reauthMax command to return
to the default setting.
Usage There are no usage guidelines for this command.
Guidelines
Examples To set the maximum number of reauthentication attempts to 5:
To set the reauthentication maximum to the default value:
See Also none
Converged Enhanced Ethernet Command Reference
53-1001762-01
DRAFT: BROCADE CONFIDENTIAL
Specifies the maximum number of reauthentication attempts before the port
goes to the unauthorized state. The range of valid values is 1-10.
switch(config)#interface tengigabitethernet 0/1
switch(conf-if-te-0/1)#dot1x reauthMax 5
switch(config)#interface tengigabitethernet 0/1
switch(conf-if-te-0/1)#no dot1x reauthMax
13
dot1x reauthMax
223