12
show qos rcv-queue multicast
show qos rcv-queue multicast
Displays the runtime state retrieved from the dataplane reflecting any multicast packet expansion
packet drops resulting from a queue crossing the maximum queue depth.
Synopsis
show qos rcv-queue multicast {tengigabitethernet slot/port | all}
Operands
tengigabitethernet
all
Defaults
There are no default configurations for this command.
Command
EXEC mode
Modes
Description
Use this command to display the runtime state information retrieved from the interface reflecting
any multicast packet expansion packet drops resulting from a queue crossing the maximum queue
depth.
Usage
For a stand-alone switch, all ASICs are considered as slot number zero (0).
Guidelines
Examples
To display the queueing information:
See Also
show qos rcv-queue interface
214
DRAFT: BROCADE CONFIDENTIAL
Specifies the 10 Gbps Ethernet interface.
slot
Specifies the 10 Gbps Ethernet interface linecard slot number.
port
Specifies the 10 Gbps Ethernet interface port number within the linecard.
Reports QoS multicast packet expansion receive queueing statistics for all
ASICs within the system.
switch#show qos rcv-queue multicast tengigabitethernet 0/2
Dropped Counts
Linecard/Portset
-----------------------------------------------------------------------------
0/0
TC 0
TC 1
0
0
Converged Enhanced Ethernet Command Reference
TC 2
TC 3
0
0
53-1001762-01