Show Spanning-Tree Mst Instance - Brocade Communications Systems 1606 Reference

9

show spanning-tree mst instance

show spanning-tree mst instance
Displays information on a specified Multiple Spanning Tree Protocol (MSTP) instance.
Synopsis show spanning-tree mst instance instance_id [interface port-channel number |interface
tengigabitethernet slot/port]
Operands instance_id
interface
port-channel number
tengigabitethernet
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
Description Use this command to display information on a specified instance of the MSTP.
Usage There are no usage guidelines for this command.
Guidelines
Examples To display information on MSTP instance 1:
See Also show spanning-tree mst brief, show spanning-tree interface
148
DRAFT: BROCADE CONFIDENTIAL
Specifies the MSTP instance for which to display information. The range of
valid values is 1-15.
Specifies the interface for which to display the MSTP instance information.
Specifies the port-channel of the interface. The range of valid values is 1-63.
Specifies a valid 10 Gbps Ethernet interface for which to display the MSTP
instance information.
slot Specifies a valid slot number for the interface for which to display information
on the MSPT instance.
port Specifies a valid port number for the interface for which to display
information on the MSPT instance.
switch#show spanning-tree mst instance 1 interface tengigabitethernet 0/0
Instance: 1; VLANs: 100
MSTI Root Id: 8001.0005.1e76.1aa0 (self)
MSTI Bridge Id: 8001.0005.1e76.1aa0
MSTI Bridge Priority: 32768
Converged Enhanced Ethernet Command Reference
53-1001762-01