Debug Ip Igmp All - Brocade Communications Systems 1606 Reference

debug ip igmp all

Displays all IGMP information.
Synopsis debug ip igmp {all | group [A.B.C.D [interface tengigabitethernet slot/port|interface port-channel
number| interface vlan vlan_id]]}
Operands all
A.B.C.D
interface
Description Displays all of the IGMP packets received and sent, and IGMP-host related events.
Defaults There are no defaults for this command.
Command Privileged EXEC mode
Modes
User Guidelines There are no user guidelines for this command.
Example none
See Also none
Converged Enhanced Ethernet Command Reference
53-1001762-01
DRAFT: BROCADE CONFIDENTIAL
Displays all values.
Specifies the group address, as a subnet number in dotted decimal format
(for example, 10.0.0.1), as the allowable range of addresses included in the
multicast group.
Use this keyword to specify any of the following interfaces:
tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
vlan vlan_id Specifies which VLAN interface to display the snooping configuration related
information. The range of valid values is 1-3583.
port-channel number
Specifies the interface is a port-channel. The range of valid values is 1-63.
10
debug ip igmp all
167