Show Port-Channel - Brocade Communications Systems 1606 Reference

show port-channel

Displays the Link Aggregation Group (LAG) information for a port-channel.
Synopsis show port-channel [channel-group-number | detail | load-balance | summary]
Operands channel-group number
detail
load-balance
summary
Note LAG interfaces are called port-channels.
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
Description Displays the LAGs present on the system with details about the LACP counters on their member
links.
Usage If you do not specify a port-channel, all port-channels are displayed.
Guidelines
Examples To display information for port-channel 10:
See Also none
Converged Enhanced Ethernet Command Reference
53-1001762-01
DRAFT: BROCADE CONFIDENTIAL
Specifies a LAG port channel-group number to display. The range of valid
values is 1-63.
Displays detailed LAG information for a port-channel.
Displays the load-balance or frame-distribution scheme among ports in the
port-channel.
Displays the summary information per channel-group.
switch#show port-channel 10
% Aggregator Po 10 0 Admin Key: 0010 - Oper Key 0010 Partner System ID:
0x0000,00-00-00-00-00-00 Partner Oper
Key 0000
% Link: Te 0/1 (67174401) sync: 0
% Link: Te 0/2 (67239938) sync: 0
show port-channel
103
6