Show Mac-Address-Table - Brocade Communications Systems 1606 Reference

show mac-address-table

Displays a specific MAC address table static and dynamic entry or the MAC address table static and
dynamic entries for a specific interface or VLAN.
Synopsis show mac-address-table [address mac-addr | aging-time | count | dynamic | interface
{tengigabitethernet slot/port | port-channel number} | linecard interface tengigabitethernet
slot/port | static | vlan vlan_id ]
Operands address mac-address
aging-time
count
dynamic
interface
linecard
interface
static
vlan vlan_id
Defaults No static addresses are configured.
Command EXEC mode
Modes
Description Use this command to display a specific static or dynamic MAC address entry or all entries for a
specific interface, a specific VLAN, a specific linecard, or for all interfaces and all VLANs.
Usage There are no usage guidelines for this command.
Guidelines
Examples To display a specific MAC address in the table:
Converged Enhanced Ethernet Command Reference
53-1001762-01
DRAFT: BROCADE CONFIDENTIAL
Specifies a 48-bit MAC address. The valid format is H.H.H (available in EXEC
mode only).
Displays the aging time.
Displays the count of forwarding entries.
Displays the dynamic MAC addresses.
Displays the forwarding information of an interface.
tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
port-channel number
Specifies the port-channel number. The range of valid values is 1–63.
Displays the linecard information.
Displays the forwarding information of an interface.
tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
Displays the static MAC addresses.
Specifies the VLAN number. The range of valid values is 1-3583.
switch#show mac-address-table address 0011.2222.3333
show mac-address-table
7
107