MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual page 341

Using btadmin
The following table describes the
settings:
Option
enable
disable
add
delete
config
For Netscape Web servers, enter the Web server instance as
Apache Web servers enter
You can enable, disable and configure the following ClusterCATS options using the
btadmin
Option
btcats
dfp
failover
load
wsroot
wsprobe
The following examples show how to use
btadmin add https-myserver
btadmin enable btcats https-myserver
btadmin disable failover https-myserver
btadmin config load https-myserver
[show]
Use the
settings.
[reset]
Use the
server. For more information on the effects of resetting a cluster member, refer to
"Resetting Cluster Members" on page
Description
Enable the specified option for a Web server instance.
Disable the specified option for a Web server instance.
Add a new Web server instance.
Delete an existing Web server instance.
Configure a specified option for an instance.
prompts you for additional information when using the
config option.
https-<hostname>
utility:
Description
Configures the ClusterCATS Server.
Configures Cisco LocalDirector's Dynamic Feedback Protocol.
Configures the ClusterCATS failover (ipaliasd) support.
Configures the load balancing preferences.
Configures a Web server root directory in case you upgrade your
installation or move the root directory.
Configures the Web server probes.
option to display the currently enabled ClusterCATS configuration
show
option to reinitialize your cluster configuration settings on the current
reset
options for changing the ClusterCATS
btadmin
.
utility:
btadmin
319.
btadmin
. For
https-<server>
323