Using Sniff; Syntax; Sample Output - MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual

Using sniff

Using sniff
The
specific Network Interface Card (NIC) is hearing.

Syntax

Invoke
directory using the following syntax:
sniff

Sample output

Below is sample output from the sniff utility:
Mail Test Environment Variables:
Packet Test Environment Variables:
Press keys at run-time:
d - dump sniff configuration information
H - display this and more help
h - display this help
l - run load balance test thread
m - run mail test thread
p - toggle packet dump display
q, <ESC>, <ENTER> - quit all active threads and exit
r - run UDP listener thread
s - run packet test thread
x - execute system command
Use the "r" command within sniff to listen to intra-cluster packets:
Listen Thread thread running on 'any' interface...
[ SrvHello
boston1.brighttiger.com
sales_automation
[[ SrvHello
somewhere.brighttiger.com
utility is a network management tool that displays the packets that a
sniff
from the command line in the <
sniff
BTMailHost, BTSender, BTRecipients, BTSubject, BTText
BTPort, BTMcastTTL, BTUcastCount, BTBcastCount, BTMcastCount
BTSendInterval, BTDoLocalBind, BTUcastAddress, BTBcastAddress
BTMcastAddress, BTLocalAddress, BTSendSize, BTRecvSize
BTConsole, BTLogFile, BTSystem
@ Tue Jun 30 17:01:57 1998] 192.168.0.213
Mcast V1.2
@ Tue Jun 30 17:01:57 1998] 192.168.0.213
CC_install_directory
(192.168.0.118 ) (255.255.255.0
Available 2/90
(192.168.0.213 ) (255.255.255.0
329
>
/program
)
)