Configuring Administration E-Mail Options On Windows; Configuring Administration E-Mail Options On Unix - MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual

300

Configuring administration e-mail options on Windows

To configure administration e-mail options:
1
2
3
4

Configuring administration e-mail options on UNIX

To configure administration e-mail options:
1
2
Open the ClusterCATS Explorer and select a cluster.
Select Configure > Support. Alternatively, you can right-click the cluster and
choose Configure > Support.
The Support dialog box appears:
Edit the e-mail support options as described in the following table:
Field Description
SMTP Gateway Enter the name of the server through which outgoing e-mail will
be sent.
Support E-mail Enter the e-mail address of the person at your organization that
should receive a copy of the nightly technical support e-mail. If
more than one person should receive the e-mail, separate the
e-mail addresses with commas.
You do not have to enter an Allaire technical support address.
That is implicit.
Report E-mail Enter the e-mail address of the person at your organization that
should receive daily reports about your clusters. If more than
one person should receive the e-mail, separate the e-mail
addresses with commas.
Click OK to enable the ClusterCATS Report and Support e-mail options.
Open ClusterCATS Web Explorer if it is not already open.
Click the Show Cluster link. The Show Cluster page appears.
Chapter 12 Configuring ColdFusion Clusters