Troubleshooting The Load-Balancing Metrics - MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual

Configuring Load-Balancing Metrics

Troubleshooting the load-balancing metrics

If you make changes to the
running you must reload the page for your changes to take effect.
If ClusterCATS gets an exception every time it processes
might have installed ClusterCATS before installing ColdFusion. In this case, verify
that the following is true:
CCRTTPercent
represents the percentage of the calculated average
CCRTTPercent
that the probe agent should apply to the load metric supplied
ROUND_TRIP_TIME
by .
CCLOADVALUE
is the second variable that you might change in
CCRTTPercent
getsimpleload.jsp
knob to determine how much external influence on server performance should
be calculated into the server's overall load value.
For example, increase
metric in the overall load calculations. The default value of
ROUND_TRIP_TIME
is 0 (disabled). If you change the load type to
CCRTTPercent
then the default value of
maximum weighting.
ColdFusionMetricThread.class
The virtual directory
created during installation but you might have removed it.)
to customize your server's load metrics. It acts as a tuning
to apply a greater weighting to the
CCRTTPercent
is 100, which gives
CCRTTPercent
getsimpleload.jsp
file is located in the
is configured on your Web server. (This was
/btauxdir
ROUND_TRIP_TIME
ROUND_TRIP_TIME
page while the ColdFusion server is
getsimpleload.jsp
/ColdFusion/lib/ext
343
,
the
, you