MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual page 108

90
4
5
6
ColdFusion Cache Settings
The Security Server value is the physical location of the security server. By
default, this is the localhost IP# 127.0.0.1. You can supply an IP address or a
logical name that can be resolved to a physical address.
Enter a Shared Secret, which is part of the encryption key that validates Advanced
security transactions. Since the default is the same for all ColdFusion Server
configurations, you should change the shared secret at least once.
ColdFusion reserves the Authorization and Authentication ports to pass security
information. Change the port number values only in the unlikely event that these
ports are already in use by some other process on the server.
Under Security Server Caching settings, click to enable the Use Security Cache,
Use Authorization Cache, or ColdFusion Server Cache if you want ColdFusion to
cache security information and transactions on the security server.
See "Caching Advanced Security Information" on page 91 for a description of the
Advanced security caches.
You can also change the Refresh Interval setting for any of the caches. This
determines how often a cache gets flushed.
The Load Policy Store Cache at Startup option loads this cache every time you
start ColdFusion services.
The Maximum Entries option in the ColdFusion Cache Settings section sets the
maximum number of entries for each cache buffer. If you exceed the number, a
warning is written to the
Chapter 5 Configuring Advanced Security
file.
server.log