Configuring Authentication On Unix - MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual

306

Configuring authentication on UNIX

To configure authentication modes for your clusters:
1
2
3
4
5
6
7
8
Open ClusterCATS Web Explorer if it is not already open.
Click the Show Cluster link. The Show Cluster page appears.
Enter the fully qualified host name of the server for which you want to configure
administrator authentication in the Web Server Name field.
Click OK. The Cluster Member List page appears.
Click the Authentication link. The Cluster Authentication page appears:
Select Local User from the Authentication drop-down box to enable local-user
authentication.
Select Disabled to disable authentication.
If using local user authentication, enter a valid user name and password and click
OK.
ClusterCATS requires you to enter a valid user name and password after selecting
the type of authentication you are using so that you do not inadvertently lock
yourself out of the cluster.
Chapter 12 Configuring ColdFusion Clusters