MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual page 305

Session-Aware Load Balancing
9
10 Configure the application probe settings as described in the following table.
To create a new probe, click New. The ColdFusion Application Probe page
appears:
If this is the first probe for this server or you clicked New to add another probe,
the ColdFusion Application Probe page appears:
Field Description
Status This is an informational field. If the probe is not registered, the
Status displays
the Status displays
Pathname Enter the path to the ColdFusion probe. Do not change the
default selection unless you installed ClusterCATS for
ColdFusion to a directory other than the default installation
directory.
Working directory Enter the path to the probe's working directory. Do not change
the default selection unless you installed ClusterCATS for
ColdFusion to a directory other than the default installation
directory.
Not registered . If the probe is registered,
Succeeding .
287