MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual page 334

316
7
8
To take a cluster member out of Maintenance mode:
1
2
3
4
5
6
7
8
Select the Stopped option to stop the ClusterCATS service and enter a value, in
minutes, in the Drain Down Period field. This allows current users to conclude
their sessions within the time indicated.
Click OK.
When the drain-down period expires, the server will fail over to another server in
the cluster.
Physically go to the server and open the ClusterCATS Server Administrator utility
on by selecting Start > Programs > ColdFusion 3.0 >
ClusterCATS Server Administrator.
The ClusterCATS Server Administrator appears.
Click the BT Service Status button to display the Manage ClusterCATS Services
dialog box.
Select the Running option.
Click OK.
Open the ClusterCATS Explorer and select the cluster member that you want to
take out of Maintenance mode.
Select Configure > Load. Alternatively, you can right-click the cluster member
and select Configure > Load.
The Properties dialog box appears for the selected cluster member with the Load
tab active.
Change the Peak load threshold from 0 percent to an appropriate value.
Click OK.
Chapter 13 Maintaining Cluster Members