MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual page 115

Specifying Resources to Protect
8
To add users and groups to a policy:
1
2
Note
Only groups are displayed when you add users to a policy. To enter an individual
user, you must know the user login and enter it in the Enter User box. Displaying a
list of all possible individual users, which could easily number in the thousands,
would be a very impractical means of adding individual users to a policy.
The users you have added to the security policy are now matched to the resources
that you have also defined and added to the policy.
You see the Resource View page again, showing the policy you just created. Other
available policies appear in a drop-down box at the bottom of the page.
Select the check boxes that correspond to the actions you want to protect.
Now you can add users to the policy.
Click the Edit Users button at the bottom of the Resource View page to open the
Users page for the current policy. Click the Add/Remove button. ColdFusion
opens the Add/Remove Users page for the current policy.
Select from the available groups on the right side of the list control and click the
left arrow to add them to the current policy. To add individual users, you enter a
login name in the Enter User box and click Add.
97