Configuring Before Scanning - Xerox XDM5205DWU - DocuMate 520 User Manual

Scanning

Configuring Before Scanning

64
Choosing Configure Before Scan simply opens a scanning
interface when you press or click a button. You can then use the
interface to change the Resolution, Scan Mode, and other settings.
When you scan, the scanned image will still be sent as the file type
and to the same Destination Application already selected in the
One Touch Properties window for that button.
To configure before scanning:
1. Open the One Touch Properties window.
2. Select the scan configuration Configure Before Scan.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the
menu, and
choose the
interface to use
for scanning.
3. Right-click on Configure Before Scan and choose an interface
to use for configuring before scanning.
TWAIN—The TWAIN Interface opens for you to make changes
prior to scanning. See "Scanning with the TWAIN Interface
from PaperPort" on page 89.
ISIS—The ISIS Interface opens for you to make changes prior
to scanning. See "Scanning with the ISIS Interface" on
page 117.
WIA—The Windows Image Acquisition Interface (WIA) opens
for you to make changes prior to scanning (available on
Windows XP only). See "Scanning with the WIA Interface" on
page 113.
4. Click OK or Apply on the One Touch Properties window.
DocuMate 520 Scanner User's Guide