Xerox XDM5205DWU - DocuMate 520 User Manual page 133

Maintenance
128
3. Squeeze the plastic clamp that holds the roller in place, and
then rotate the clamp forward until the locking tabs are free
from the ADF cover.
4. Gently slide the roller to the right until the left side is free from
its mounting hole.
5. You can now angle the roller assembly out and away from its
housing.
6. Reverse the procedure to replace the new roller. Make sure
both sides of the roller assembly are seated properly into their
housings.
DocuMate 520 Scanner User's Guide