Specifications - Konica Minolta DR1600 Operator's Manual

SPECIFICATIONS

■ Type:
■ Lens:
■ Film:
■ Document Size:
■ Frame (Aperture) Size:
■ Pulldown:
■ Spacing:
■ Resolution:
■ Depth of Field:
■ Reduction Ratios:
■ Numbering:
■ Document Marks:
■ Document Mark
Positioning:
■ Film Supply Warning:
■ Exposure Control:
■ Light Source:
■ Power Requirement:
■ Power Consumption:
■ Dimensions:
■ Weight:
■ Options:
■ Accessory:
CAUTION
Use a shielded cable for the RS-232C interface cable.
Specification of this equipment are subject to change without notice.
.
1
: Planetary Microfilmer
: Micro-Rokkor f = 28 mm
: 16-mm Roll Film (Non-Perforated)
5 mil - 100 ft., 2.5 mil - 215 ft.
: Max. 17" x 11" or A3
: Single - 9.7 x 12.6 mm
Double - 18.2 x 12.6 mm
Automatically selected according to the original size detected, or manually selected.
: Single - 10.0 mm (9.5 to 11.75 mm)
Double - 18.5 mm (18.0 to 23.5 mm)
: Single Frame, Prefixed Frames (5 to 250 frames) and Any Desired Frames
(1 to 9999 frames)
: 150 lines or more/mm
: +20 mm from Copy Board
: 1/25 (Single and Double Frames)
1/32 (Single Frame)
: 12 digits (4 digits x 3 fields)
• Used for the block, batch, and item numbers.
• Can also be used as an 8- or 4-digit counter.
: Three document mark levels
Tri level (L, M, S)
Dual level (L, S)
Single level (L or M or S)
: Document Mark Positioning of the medium width Single Level Mark can be adjusted
by using choice Mode (between 1.21 to 4.21 mm).
: Beeping warns that the film will soon be running out and a warning Light indicates
the length of film remaining for use reaches approx. 1.5 meters. (5 ft.)
: Automatic and Manual exposure control
: Two 15-W fluorescent lamps
: 120 V 60 Hz, 220/230 - 240 V 50 Hz
: 100W
: 900 (W) x 700 (D) x 1250 (H) mm or 35-7/16" (W) x 27-9/16" (D) x 49-7/32" (H)
: 41 kg or 90 lbs
: Foot Pedal, Black Board, Resettable Counter (6-digit), RS232C Interface Kit
: Blower Brush, Reel