Konica Minolta DR1600 Operator's Manual page 21

❑ Unloading Full Roll:
13
1
Press [STOP] Key to stop the beeps sounding.
Immediately stop filming and, using the Spacing Key,
advance film until it is completely wound around the
Take-Up Spool. Turn Power ON/OFF Switch off, then,
remove the Film Unit from the Film Unit Mounting Board.
NOTE
Additional exposures can be taken even after the beeps
have sounded and the Film Empty Indicator has lit;
however, be sure to allow at least 800 mm or 31-1/2" for
the trailer.
2
Turn the Film Door Lock in the direction of arrow and
open the Take-Up Door.
3
Remove the Take-Up Spool from the Take-Up Spindle
and place it into a light-proof container.
NOTE
Open the Supply Door and remove the empty Supply
Spool which can be used as the Take-Up Spool.