Konica Minolta DR1600 Operator's Manual page 5

Power source
WARNING
• Use only the specified power source voltage. Failure to do
that could result in a fire or electrical shock.
• Connect power plug directly into wall outlet having the same
configuration as the plug. Use of an adapter leads to the
product connecting to inadequate power supply (voltage,
current capacity, grounding), and may result in fire or shock.
If proper wall outlet is not available, the customer shall ask
qualified electrician for the installation.
• Do not use a multiple outlet adapter nor an extension cord in
principle. Use of an adapter or an extension cord could
cause a fire or electrical shock.
Contact your authorized service representative if an exten-
sion cord is required.
• Consult your authorized service representative before con-
necting other equipment on the same wall outlet. Overload
could result in a fire.
CAUTION
• The outlet must be near the equipment and easily accessi-
ble. Otherwise you can not pull out the power plug when an
emergency occurs.
Power plug
WARNING
• Do not unplug and plug in the power cord with a wet hand,
as an electrical shock could result.
• Plug the power cord all the way into the power outlet. Failure
to do this could result in a fire or electrical shock.
CAUTION
• Do not tug the power cord when unplugging. Pulling on the
power cord could damage the cord, resulting in a fire or
electrical shock.
• Remove the power plug from the outlet more than one time
a year and clean the area between the plug terminals. Dust
that accumulates between the plug terminals may cause a
fire.
Grounding
WARNING
• Connect the power cord to an electrical outlet that is
equipped with a grounding terminal.