Related Manuals for CET PMC-53M
Summarization of Contents
Chapter 1 Introduction
Overview
Provides a general overview of the PMC-53 series intelligent multifunction meter.
Key Features
Details the enhanced measurements and capabilities of the PMC-53 series meter.
Applications in Power and Energy Management
Explains how the PMC-53 series meter is used in Power and Energy Management Systems.
Obtaining Further Information
Provides contact details and resources for obtaining additional information about the PMC-53 series.
Chapter 2 Installation
Meter Appearance
Illustrates the physical appearance and components of the PMC-53 series meter.
Unit Dimensions
Presents the physical dimensions of the PMC-53 series meter for installation planning.
Mounting Procedures
Describes the recommended procedure and environment for mounting the PMC-53 series meter.
Wiring Configurations
Details the various wiring configurations supported by the PMC-53 series meter.
Communications Wiring
Explains how to connect the PMC-53 series meter for RS485 communications.
Digital Input Wiring
Illustrates the wiring diagram for the digital input terminals of the PMC-53 series meter.
Digital Output Wiring
Illustrates the wiring diagram for the digital output terminals of the PMC-53 series meter.
Pulse Output Wiring
Shows the wiring connections for the pulse output functionality of the PMC-53 series meter.
I Residual Input Wiring
Details the wiring for the I residual input, used for ground fault monitoring.
Temperature Input Wiring
Illustrates the wiring for the temperature input, used for temperature monitoring.
Power Supply Wiring
Explains how to connect the power supply to the PMC-53 series meter.
Chapter 3 Front Panel Operations
LCD Display Overview
Describes the LCD display areas and symbols used on the PMC-53 series meter.
LED Indicator Functions
Explains the function and meaning of the LED indicators on the PMC-53 series meter.
Display Screen Navigation
Details the different data display modes and screens available on the PMC-53 series meter.
Front Panel Configuration
Guides users on how to configure the PMC-53 series meter using its front panel controls.
Chapter 4 Applications
Inputs and Outputs
Covers the digital inputs, digital outputs, and optional I/O functionalities of the PMC-53 series meter.
Power and Energy Measurements
Explains the measurements and calculations related to power and energy parameters.
Setpoint Configuration
Describes the different types of setpoints and their configurations for alarming and control.
Sequence of Events (SOE) Log
Details the Sequence of Events (SOE) log, which records events with timestamps.
Power Quality Analysis
Explains the power quality measurements like Harmonics and Unbalance.
Chapter 5 Modbus Register Map
Basic Measurements Registers
Lists the Modbus registers for basic electrical measurements like voltage and current.
Energy Measurement Registers
Details the Modbus registers for energy consumption measurements (kWh, kvarh, kVAh).
Peak Demand Registers
Provides Modbus register information for peak demand values and timestamps.
Harmonic Measurement Registers
Lists Modbus registers for harmonic measurements such as THD and K-Factor.
Setup Parameter Registers
Details Modbus registers for configuring various meter parameters.
SOE Log Registers
Describes the Modbus registers related to the Sequence of Events (SOE) log.
Time Registers
Explains the Modbus registers for setting and reading the meter's time.
DO Control Registers
Details the Modbus registers for controlling Digital Outputs (DO).
Meter Information Registers
Covers Modbus registers for retrieving meter model, firmware, and serial number.
Appendix A: Technical Specifications
Voltage and Current Input Specs
Specifies the input ranges and characteristics for voltage and current measurements.
Power Supply Specifications
Details the power supply requirements and specifications for the meter.
Digital I/O Specifications
Outlines the specifications for digital input and output interfaces.
Pulse Output Specifications
Specifies the characteristics of the pulse output signals for energy measurement.
I Residual Input Specs
Details the specifications for the I residual input used for ground fault detection.
RTD Temperature Input Specs
Specifies the requirements for the RTD temperature sensor input.
Alarm Buzzer Specifications
Provides specifications for the built-in alarm buzzer.
I Residual Sensor Specifications
Details the specifications for the external residual current sensor.
Appendix B: Residual Current Sensor
Ordering Guide for Sensors
Lists available models of residual current sensors with their specifications and weights.
Sensor Technical Specifications
Details the technical specifications for residual current sensors, including current and voltage ratings.
Sensor Environmental Conditions
Outlines the operating and storage temperature ranges for the residual current sensor.
Sensor Testing Procedures
Specifies the dielectric strength testing parameters for the residual current sensor.
Appendix C: Temperature Sensor
Sensor Model and Dimensions
Lists temperature sensor models with hoop diameters and corresponding weights.
Sensor Technical Specifications
Details the technical specifications for the temperature sensor, including range and accuracy.
Appendix D: Standards Compliance
Safety Requirements Compliance
Lists the safety standards and requirements the device complies with.
EMC Compliance
Details compliance with electromagnetic compatibility standards and tests.
Immunity Tests Compliance
Lists the immunity test standards applicable to the device.
Emission Tests Compliance
Outlines the emission test standards relevant to the device.
Mechanical Tests Compliance
Specifies the mechanical test standards the device adheres to.
Appendix E: Ordering Guide
Product Code Configuration
Explains how to configure the product code for ordering the PMC-53 series meter.
Contact Information
Provides contact details for Ceiec Electric Technology headquarters.
Need help?
Do you have a question about the PMC-53M and is the answer not in the manual?
Questions and answers