Phone Wiring - Visonic POWERMAX PRO Installer's Manual

1
Release
screws

3.5.1 Phone Wiring

Connect the receptacles of supplied flat cables
(2 - 5 cables according to options) to the back unit's plugs.
The receptacles with strain relief clip are for the
front unit - do not connect to the back unit!
D-302541
Separate
the back unit
from the
front unit
2
4
Drill 4 holes and insert wall anchors
Figure 3.1a – Back Unit Mounting
PHONE WIRING USING RJ CONNECTORS
1
Strain relief clip
Back unit
3
Position the back unit on the desired
mounting location and mark 4 drilling points
on mounting surface
For all countries except north America:
Connect telephone cable to SET connector
and telephone line cable to LINE connector
(through the desired wiring cable entry).
Back unit
5
Fasten the back unit with 4 screws
2
5