Mounting; Wiring - Visonic PowerMaxExpress Installer's Manual

3.4 Mounting

Required tool: Philips screwdriver #2.
PowerMaxExpress mounting process is shown in figure
3.1 - 3.8.
Drill 4 holes and insert wall anchors
Cables entry
possibilities
D-302980
1
Release
screws
4
Figure 3.1 – Back Unit Mounting
CABLES ROUTING GUIDE
1
Remove the left or right side
cables entry knockout(s) and
enter the required cable(s).

3.5 Wiring

Required tools: Cutter and slotted screwdriver - 3 mm
blade.
PowerMaxExpress wiring is shown in figure 3.2.
Remove
front
cover
Cable clips
2
Remove and use as
cable clamp(s)
Back unit
3
Mark 4 drilling points on mounting surface
5
Fasten the back unit with 4 screws
(example)
5