System Configuration Menu; Overview; Menu Function And Operation - Sony BVM-E250 Operation Manual

System Configuration Menu

Overview

This menu is used to set the system such as the network, parallel remote control function, etc.
When System Configuration is selected, the following menu is displayed.
iSystem Configuration
B
Network
B
Parallel Remote
B
Power
B
On Screen Set
B
Password
B
Date/Time
xxx
Scan Mode Skip:
xxx
Screen Saver:
B
Monitor Upgrade
B
Maintenance

Menu Function and Operation

Menu
Network
Monitor ID
Group ID
Network Setting
IP Address
Subnet Mask
Default Gateway
Address
Cancel
Confirm
Protocol Setting
SDCP/SDAP Community
68
System Configuration Menu
Function and operation ([
Sets the remote control function of the network.
Enter a monitor ID number.
Set to 01 to 99. [01]
Enter a group ID number.
Set to 01 to 99. [01]
Sets the IP address, subnet mask and default gateway.
For the setting value, consult the network administrator.
Sets the IP address. [192.168.000.001]
Note
When the NETWORK switch is set to PEER TO PEER, the IP address is set to "192.168.0.1"
regardless of the display.
When the NETWORK switch is set to LAN, the IP address is set to the displayed one.
Sets the subnet mask. [255.255.255.000]
Note
When the NETWORK switch is set to PEER TO PEER, the subnet mask is set to
"255.255.255.000" regardless of the display.
When the NETWORK switch is set to LAN, the subnet mask is set to the displayed one.
Sets whether or not to set the default gateway ([Off] or On).
Sets the address of the default gateway. [---.---.---.--- (no setting)]
Cancels the changed or confirmed setting.
Saves the changed or confirmed setting.
Sets the required items for communications such as the port number.
For the setting value, consult the network administrator.
Sets the SDCP/SDAP community name.
When the item is selected, you can enter the community name (four characters).
SONY: SONY is entered as a community name.
New Name: Enter a new name.
]: factory setting)