Settings; Selecting The Area - Sony BVM-E250 Operation Manual

Settings

Selecting the Area

When you turn on the monitor for the first time after
purchasing it, select the area where you intend to use this
monitor from among the options.
When the area is selected, the menu item settings suitable
for the selected area are applied.
Default value for each area
4
3
1North America
2Latin America
Argentina
PAL&PAL-N
Paraguay
Area
Uruguay
NTSC&PAL-
Other Area
M Area
3Africa
Australasia
Europe
Middle-East
NTSC Area
4Asia Except
Japan
PAL Area
5Japan
26
Settings
3
1
5
2
3
Color Setup Component
Temp Level Level
D65 7.5% Betacam
SMPTE/
D65 0%
EBU-N10
SMPTE/
D65 0%
EBU-N10
SMPTE/
D65 0%
EBU-N10
D65 7.5% Betacam
SMPTE/
D65 0%
EBU-N10
D65 7.5% Betacam
SMPTE/
D65 0%
EBU-N10
SMPTE/
D93 0%
EBU-N10
1
Turn on the monitor with the MAIN POWER switch.
The Select Area screen appears.
Select Area
North America
Latin America
Africa
Australasia
Europe
Middle-East
Asia Except Japan
Japan
Color
Profile
ITU-R
BT.709
ITU-R
BT.709
ITU-R
2
Press the UP or DOWN button of the controller to
BT.709
select the area where you intend to use the monitor and
ITU-R
BT.709
press the ENTER (Ent) button.
ITU-R
BT.709 If you select either Latin America or Asia Except
Japan, one of the following screens appears.
ITU-R
BT.709
If 2 Latin America is selected:
ITU-R
BT.709
Select Area
ITU-R
BT.709
Latin America
ITU-R
PAL & PAL-N Area
BT.709
NTSC & PAL-M Area B
Select PAL & PAL-N or NTSC & PAL-M and press
the ENTER (Ent) button.
ENTER button
UP/DOWN buttons
Ent button
1 North America
2 Latin America
3 Africa
B
B
B
B Australia/New Zealand
B
B
B
B
Europe/Russia
Middle East
4 Asia Except Japan
5 Japan
PAL&PAL-N area
B
NTSC&PAL-M area