Sony BVM-E250 Operation Manual page 45

Menu
Color Temp Adj
Manual
Manual Adjust
Function and operation ([
Adjusts the color temperature.
When the item is selected, the color temperature data to be adjusted is displayed.
Except for the XYZ format signal
When D93, D65, D61, D55 or D-Cine data is changed, they are displayed as D93*, D65*,
D61*, D55* or D-Cine*.
To change the color temperature data to be adjusted, select D93, D65, D61, D55, D-Cine,
User1, User2, User3, User4 or User5 in the Color Temp menu of the Channel Configuration
menu.
For the XYZ format signal
When D-Cine XYZ data is changed, it is displayed as D-Cine XYZ*.
To change the color temperature data to be adjusted, select D-Cine XYZ, User XYZ1, User
XYZ2, User XYZ3, User XYZ4 or User XYZ5 in the Color Temp menu (page 50) of the
Channel Configuration menu.
Adjusts the color temperature manually.
When the item is selected, the color temperature data to be set is displayed.
Except for the XYZ format signal
When D93, D65, D61, D55 or D-Cine data is changed, they are displayed as D93*, D65*,
D61*, D55* or D-Cine*.
For the XYZ format signal
When D-Cine XYZ data is changed, it is displayed as D-Cine XYZ*.
When Contrast/Bright Hold is set to Off, the color temperature data are displayed. The
contrast data is displayed as the picture preset data Preset1 to Preset5 or Preset (D-Cine) set
in the Picture Preset menu of the Channel Configuration menu. To change the type of the
picture preset data, select from Preset1 to Preset5 or Preset (D-Cine) in the Picture Preset
menu (page 50) of the Channel Configuration menu.
Adjusts the color temperature using the PHASE, CHROMA, PHASE and/or CONTRAST
knobs.
When the item is selected, the color temperature adjustment display appears, and the Red,
Green and/or Blue color temperature data to be adjusted are displayed to allow gain or bias
adjustment. Select gain or bias adjustment, using the UP/DOWN buttons.
The adjustable items and relevant knobs are as follows:
To adjust Red (red): BRIGHT knob
To adjust Green (green): CHROMA knob
To adjust Blue (blue): PHASE knob
To adjust brightness (Red, Green and Blue together): CONTRAST knob
To hide the characters on the monitor during manual adjustment
Set the CHAR OFF button of the controller to on. As the characters on the display are
hidden, it becomes easy to adjust the picture. To display the characters, set the CHAR OFF
button to off.
To reset Red, Green and Blue to the value before adjustment
During Red, Green and Blue adjustment, you can press the corresponding MANUAL button
to reset to the value before adjustment.
Pressing the MANUAL button of CONTRAST resets all Red, Green and Blue to the values
before adjustment.
Note
You cannot reset the setting after you press the ENTER (Ent) button, even if you press the
MANUAL button.
To cancel adjustment
Press the MENU button. The adjustment data is cleared and the setting returns to the
previous value.
To confirm adjustment
Press the ENTER (Ent) button.
]: factory setting)
45
Adjustment Menu