Function Setting Menu; Overview; Menu Function And Operation - Sony BVM-E250 Operation Manual

Function Setting Menu

Overview

This menu is used to set the function related to the picture display.
When Function Setting is selected, the following menu is displayed.
iFunction Setting
B
Marker Setting
B
P&P Setting
B
Pixel Zoom Setting
Gamut Error Display B
B
3D Setting
B
Capture
B
Internal Signal
B
Function Switch

Menu Function and Operation

Menu
Marker Setting
Aspect Marker
Aspect Marker
Aspect Mode
Aspect
Line
Thickness
Color
56
Function Setting Menu
Function and operation ([
Sets whether or not to display the marker when the MARKER button is pressed, and the
display mode.
When the item is selected, the marker preset data to be set is displayed.
To change the marker preset data to be adjusted, you can select from Marker1, Marker2,
Marker3, Marker4 and Marker5 in the Marker Preset menu (page 52) of the Channel
Configuration menu.
To hide the characters on the monitor during setting
Set the CHAR OFF button of the controller to on. As the characters on the display are
hidden, it becomes easy to adjust the picture. To display the characters, set the CHAR OFF
button to off.
Sets the aspect marker display.
Sets whether or not to display the aspect marker when the MARKER button is pressed ([Off]
or On).
Sets the aspect ratio of the aspect marker.
You can select from [16:9], 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.85:1, 1.66:1, 1.896:1 or
Variable.
Sets the aspect ratio of the aspect marker when Variable is selected in Aspect Mode.
Set to 1.00:1 to 3.00:1. [1.78]:1
Sets whether or not to display the line of the aspect marker (Off or [On]).
Sets the thickness of the aspect marker.
Set to 1 to 5 (dots). [2]
Sets the color of the aspect marker.
You can select from [White] (white), Red (red), Green (green), Blue (blue), Yellow (yellow),
Cyan (cyan) or Magenta (magenta).
]: factory setting)