Programming your telephone
Storing functions under the Hotkey
Same procedure as under Number/Name until it comes time to select the memory
Hk1...Hk6. From that option:
1
2
4
5
7
8
0
Notes
•
The corresponding function codes are entered in the two memory locations
automatically and can be added to/amended as required.
•
If you do not enter a name when storing, a short default name will be used, e.g.
"DND" for "Do not disturb".
•
The symbol "j" in the symbol line and a " " next to the function indicate that a
programmed function is active.
•
The program jumps directly to the Hotkey Programming when you "Long click" the
Hotkey.
20317845en_ba_a0
Press Foxkey under " " to call the menu
"Fn: Funct." (Function) and confirm by pressing
"Ok".
Press the Foxkey under " " repeatedly until the
desired function is displayed and confirm with
"Ok".
The contents of memory 1 for this function are
displayed (activate function).
Press Foxkey under "Ok" to store the function in
memory.
If desired, enter a name and acknowledge with
3
6
"Ok". The contents of memory 2 are displayed
9
(deactivate function).
The function is stored in memory using "Ok".
33
Need help?
Do you have a question about the OFFICE 130PRO and is the answer not in the manual?