Table of Contents
Advertisement
Before you telephone for the first time
Setting the display language
The language spoken in the area is usually preset in your handset. If you prefer another
one, you can select among several different languages.
*Lang
M
Ok
Setting the display contrast
For improved legibility of the display under various light conditions, you can change the
display contrast.
Register the PBX system
You can register your handset for as many as 4 different PBX systems (A, B, C, D). So, you
can be reached on your handset even while you are at a branch of your company.
M
M
New
1) See section Programming mode, page 23
10
Press the M-key repeatedly in programming
¥
mode
1)
until, "*Language" appears. (look for the
"*" symbol with a foreign language). Press the
Foxkey under "*Language". By pressing the
Foxkey under "¥" select the desired language.
Confirm the selected language by pressing the
Foxkey under "Ok". Press the C/End key to re-
C
turn to the standby display.
"Long click" the # key to skip to the menu item
#
"Contrast".
¥
Press the Foxkey under "¥" repeatedly until the
desired contrast is obtained
OK
Press the Foxkey under "OK" to confirm the
contrast setting.
Press the M-key repeatedly in programming
System
mode
1)
until "System" appears. Then press
Foxkey under "System". "Auto" or the current
system (A, B, C, or D) will appear in the display.
Press the M-key. If "Register: A" and "Delete"
Delete
appear, the handset is registered with PBX system
"A" (this registration could be canceled by press-
ing the Foxkey under "Delete").
Using the Foxkey under "¥", the handset can be
¥
registered with another three PBX systems (B, C
or D). The display then changes to "Register: B (C
or D)" and "New". Pressing the Foxkey under
"New" and "Home" causes the handset to be
Home
registered in system "B" (provided this is allowed
and the system is available).
20317845en_ba_a0
Advertisement
Table of Contents
