Programming your telephone
Switching the trembler on
The trembler is a discrete and reliable way of being made aware of a call, should you fail
to hear the call because of a noisy environment and not notice the call LED either.
M
Ring
Notes
•
The display symbol "
•
"Long click" the Loudspeaker key to skip to the "Trembler" menu
1) Office 130pro only. The appearance of the menu depends on the software and the PBX type.
2) Always functions with Office 130pro, irrespective of the software and the PBX type.
38
1)
M
¥
Ok
¥
Ok
" indicates that the trembler is switched on.
v
In programming mode keep pressing the M-key
until "Ring" appears.
Press the Foxkey under "Ring" and then use the
Foxkey under "¥" to select "Trembler".
Press the Foxkey under "OK" to proceed to the
menu "Trembler".
With the Foxkey under "¥" you can select
either "Ring only", "Trembler only" or "Both"
by pressing the Foxkey under "OK" at the
appropriate display.
2)
.
20317845en_ba_a0
Need help?
Do you have a question about the OFFICE 130PRO and is the answer not in the manual?