Table of Contents
Advertisement
Telephoning
Dialling with dialling preparation
Dialling preparation reduces the chance of misdialling.
Without pressing the Call key or the Loudspeaker key beforehand, enter the desired
number, check it and make any corrections using the C-key. Then press the Call key or the
Loudspeaker key. It is only at this point that the number is dialed.
Dialling using digits
This is just like traditional dialling, but dialling is not commenced until you press the Call
key or the Loudspeaker key.
1
2
3
4
5
6
7
8
9
0
Dialling using repeat dialling function (redial)
The numbers and the names of up to the last 10 subscribers called are stored in the "Last
Number Redial" memory.
M
¥
Note
The i-symbol refers to additional information, which you can call up by pressing this key.
Dialling using the Hotkey
You can store up to 6 names/numbers of frequently called subscribers in the Hotkey
memory.
Meier
14
Enter digits and press the Call key or the
or
Loudspeaker key.
Redial
Press the M-key.
Press the Foxkey under "Redial". The display
shows the number and possibly the name of the
last subscriber called.
Press Foxkey under "¥" until the number of the
desired subscriber appears. Press the Call key or
or
the Loudspeaker key.
Press the Hotkey repeatedly until the desired
name is displayed.
Press the Foxkey under the desired name and
or
then press the Call key or the Loudspeaker key.
20317845en_ba_a0
Advertisement
Table of Contents
