Related Manuals for Smartgen HGM410
Summarization of Contents
OPERATION
PUSHBUTTONS
Describes the function of each button on the controller's panel for operation.
INDICATOR LIGHT
Explains the meaning of various indicator lights on the HGM410 and HGM420 models.
AUTOMATIC START/STOP OPERATION
Details the sequence of operations for automatic start and stop of the genset.
MANUAL START/STOP OPERATION
Outlines the procedures for starting and stopping the genset in manual mode.
PROTECTION
WARNINGS
Lists warning alarms that do not cause shutdown but provide operational alerts.
SHUTDOWN ALARM
Details shutdown alarms that will stop the generator and display information on the LCD.
DEFINITION AND RANGE OF PARAMETERS
PARAMETER CONTENTS AND RANGE (TABLE 1)
Defines various parameters, their adjustable ranges, default values, and descriptions.
PROGRAMMABLE OUTPUT 1-5 (TABLE 2)
Lists and describes the functions of programmable outputs 1 through 5.
PROGRAMMABLE INPUT 1-4 TABLE (ACTIVE WHEN CONNECT GND (B-) (TABLE 3)
Explains the functions of programmable inputs 1 through 4 and their active conditions.
SENSOR SELECT (TABLE 4)
Details the options for selecting and configuring temperature, pressure, and fuel level sensors.
CONDITIONS OF CRANK DISCONNECT (TABLE 5)
Specifies the conditions under which the starter motor disconnects from the engine.
INSTALLATION
FIXING CLIPS
Describes the method for installing the controller using its built-in fixing clips.
OVERALL DIMENSION AND PANEL CUTOUT
Provides the overall dimensions of the controller and the required panel cutout size.
Need help?
Do you have a question about the HGM410 and is the answer not in the manual?
Questions and answers