Loading A Saved Route - ZENEC E GO Manual

The saved route might have been influenced by TMC information. When you later use the
route, it appears as it was saved. But if it needs to be recalculated, the current TMC
information will be used in the new route.
If you updated your map since you first saved the route, ZENEC Navigation Software
recognises the change, and recalculates the driving instructions according to the latest
available map information.
ZENEC Navigation Software deletes from the route any via points that you already left behind
during navigation together with the road segments used to reach it. To avoid this, if you want to
save the route, you need to save it before you start navigating.

3.10 Loading a saved route

The procedure is explained starting from the Map screen.
1. Tap the following buttons:
2. Tap the route you wish to navigate.
3. In the very likely case when the start position of the saved route is different from the current
GPS position, you need to confirm whether you want to stop navigating from the current GPS
position to use the start point of the loaded route.
If you choose this option, automatic off-route recalculation will be disabled.
If you choose to keep the current GPS position as the start point, the route will be
recalculated starting from your current position.
4. The map appears, and you can start navigating.
, , .
41