Icons On The Map; Gps Position Quality Indicator; Status Indicator Strip - ZENEC E GO Manual

4.1.1 Icons on the map

There are several status icons on the map. Most of them also function as a button. The information
they provide is as follows:
GPS position quality
Sound status (muted or enabled)
TMC reception and processing status

4.1.1.1 GPS position quality indicator

This area is a status indicator, and also acts as a button that opens the Quick menu.
GPS reception quality shows the current accuracy of the position information.
Icon

4.1.1.2 Status indicator strip

This is a multiple status indicator. It indicates the following status information on a single strip:
Icon
The sound output of ZENEC Navigation Software is muted.
The sound output of ZENEC Navigation Software is enabled.
No TMC receiver is connected or TMC is turned off.
A TMC receiver is connected and a radio station with TMC broadcast is received.
There are new, unread TMC events.
A part of the route is bypassed based on TMC events.
A part of the route is mentioned in TMC events but could not be bypassed (for example,
the destination is on a congested street).
ZENEC Navigation Software has no connection to the GPS receiver:
GPS navigation is not possible.
Devices with a built-in GPS receiver are permanently connected. On
such devices, the icon does not appear in normal circumstances.
ZENEC Navigation Software is connected to the GPS receiver, but the
signal is too weak and the receiver cannot determine the GPS position.
GPS navigation is not possible.
Only a few satellites are received. Position information is available, but
elevation (altitude) cannot be calculated.
GPS navigation is possible, but the position error may be significant.
Altitude information is available, the position is a 3D position.
GPS navigation is possible.
Description
Description
45