Map Screen Settings - ZENEC E GO Manual

4.5.1 Map Screen settings

You can fine-tune the appearance and content of the Map screen. Tap the following buttons:
,
Button
3D Settings
Colour Profiles
Elevation on 2D Map
Show Street Names
Lane Information
62
62
.
Use 3D settings to determine which of the present 3D objects are shown on
the map, and adjust the level of 3D visual detail. The options are as follows:
Landmarks: Landmarks are 3D artistic or block representations of
prominent or well-known objects. 3D landmarks are only available in
selected cities and countries.
Elevated Roads: Complex intersections and vertically isolated roads
(such as overpasses or underground tunnels) are displayed in 3D.
Building Visibility: Full 3D city building data that represents actual
building size and position on the map. Building data is limited to the
city centres of major cities in the US and Europe.
Terrain Detail Level: 3D terrain map data shows changes in terrain,
elevations or depressions in the land when you view the map, and use
it to plot the route map in 3D when you navigate.
ZENEC Navigation Software is able to show the map and the menus in
different colours during the day and during the night. Select the colour
profiles to be used in each mode, and select the automatic or manual
switching between the daytime and night colour profiles.
2D maps can also display 3D information. These top-down maps can display
elevation by colours and shading.
Street names and POI icons can be disturbing on the map during navigation.
With this switch you can suppress these map elements when ZENEC
Navigation Software is following your position on the map. If you move the
map, both the street names and POI icons reappear immediately.
Some maps contain lane information to help you position your car in the
upcoming intersection. This setting tells ZENEC Navigation Software whether
to display this information at the top or at the bottom of the map.
Description
,