Route Demonstration; Poi (Points Of Interest) - ZENEC E GO Manual

2.3.8 Route demonstration

A simulation drives you through the route, following the driving instructions (page 39).
You can use it, for example, to see which bridge ZENEC Navigation Software planned for the route; if
you do not want to take that bridge, you can avoid it.
Route demonstration can be started from the Route menu by tapping the

2.3.9 POI (Points of Interest)

A point of interest (POI) is a location that someone might find useful or interesting. ZENEC Navigation
Software is delivered with thousands of POIs and you can also create your own POIs in the
application.
POI locations are marked on the map with special icons. POI icons are quite large so you can easily
recognise the symbol. The icons are also semi-transparent: they do not cover the streets and
intersections behind them.
POIs are grouped into several levels of categories and subcategories. The icon of a POI that comes
with the map shows the symbol of the POI category. If you save your own POI, you can select an icon
for it independently of the POI category you have put it in.
Saving POIs
To save a POI, place the Cursor (
,
Managing POIs
You can select which POI groups to show and which ones to hide on the map, and from which zoom
levels POI icons are visible. At the same place you can manage your saved POIs. A saved POI can
be renamed, moved to a different POI group, its icon can be changed, or a phone number and
additional information can be added to it. Tap the following buttons:
.
) at the desired location, then tap the following buttons:
.
button.
,
, ,
23
23