Selecting The Destination From The History; Selecting The Destination By Entering Its Coordinates - ZENEC E GO Manual

5. Tap the desired POI in the list.
6. The map appears with the selected point in the middle. Tap
menu. The route is then automatically calculated, and you can start navigating.

3.1.5 Selecting the destination from the History

The destinations that you have set earlier appear in the History.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
2. If necessary, move between pages with
3. Tap the desired item.
4. The map appears with the selected point in the middle. Tap
menu. The route is then automatically calculated, and you can start navigating.

3.1.6 Selecting the destination by entering its coordinates

The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
2. [optional] Tap
3. Tap the latitude or longitude value to change the coordinates.
4. Enter the coordinate values in WGS84 format on the keyboard: the latitude (N or S) and the
longitude (E or W).
5. Tap
6. The map appears with the selected point in the middle. Tap
menu. The route is then automatically calculated, and you can start navigating.
,
,
to change the format of the displayed coordinates.
.
.
to see earlier destinations.
.
from the Cursor
from the Cursor
from the Cursor
37