Building A Route From The List Of Destinations (Create Route) - ZENEC GPS NAVIGATION SYSTEM Main User Manual

7. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
location. Tap
8. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap

3.1.8 Building a route from the list of destinations (Create Route)

You can also build your route destination by destination from the My Route menu.
1. If you are on the Map screen, tap
menu.
2. In the Navigation menu, tap
3. Tap
4. There is only one line in the list of route points, the start point of the route, normally the
current GPS position.
5. Tap to select the destination.
6. The Destination menu appears and you can select the destination of the route the
same way as described in the previous sections.
to confirm the destination, or tap
to select a different destination.
and start your journey.
.
50
) appears at the new
to modify route
to return to the Navigation
.