Highway Mode; Status Information And Hidden Controls On The Map - ZENEC E GO Manual

2.2.4 Highway mode

When navigating on motorways, it can be important to know the available facilities at the next few
exits. The navigation software opens a panel with this information. The number and the distance of
the exit is displayed with the icon of the following facilities if they exist:
Accommodation
Parking
Petrol station
Restaurant
This feature can be turned off in Route Planning options (page 63).

2.2.5 Status information and hidden controls on the map

The following information appears in the rounded field in the top left corner, the Turn Preview field.
When tapping this area, the result depends on the information currently shown.
Icon Information
There is no active
route
There is no valid
, GPS position.
If the icon is a
static picture,
route calculation
is needed
If the icon is
animated, route
calculation is in
progress
Next route event
(next manoeuvre)
,
Details
If there is no route to be
navigated, this icon appears
in the Turn Preview field.
If an active route exists, and
there is no valid
position, the view of the sky
above you is shown with
coloured dots for
satellite. Some dots need to
turn green to be able to
navigate.
GPS position and an active
route are available, but
automatic off-route
recalculation is switched off,
and you deviated from the
route.
ZENEC Navigation Software
is calculating or recalculating
the route.
GPS position and an active
route are available, and you
navigate the recommended
route. This area gives you
information about the type
and distance of the next
route event.
-
Action
Tap this area to open Find.
Tap this area to open the Route
Information screen.
GPS
each
Tap this area to make ZENEC
Navigation Software recalculate
the recommended route.
Nothing happens if you tap this
area of the screen.
Tap this area to open the Route
Information screen.
15