Lane Information And Signposts - ZENEC E GO Manual

Action
Returning to
normal
navigation (back
to the GPS
position with
automatic map
rotation)
Zoom preset
buttons
Tilt and zoom
preset buttons
Map scale

2.2.3 Lane information and Signposts

When navigating on multilane roads, it is important to take the appropriate lane in order to follow the
recommended route. If lane information is available in the map data, ZENEC Navigation Software
displays the lanes and their directions using small arrows either at the bottom or at the top of the map
(the position of these arrows can be modified in Map Screen settings). Arrows in yellow represent the
lanes you need to take.
Where there is additional information available, signposts substitute arrows. Signposts are always
displayed at the top of the map. The colour and style of the signposts are similar to the real ones you
can see above road or by the roadside. They show the available destinations and the number of the
road the lane leads to.
All signposts look similar when cruising (when there is no recommended route). When navigating a
route, only that signpost is displayed in vivid colours that points to the lane(s) to be taken; all others
are darkened out.
14
Button(s)
Tap this button once to enable Smart Zoom.
Tap&hold the button to set the zoom limits of Smart Zoom.
Tap this button to move the map back to the current GPS
position. If the map has been rotated in 3D mode, automatic
map rotation is also re-enabled.
Tap one of the preset buttons to set the zoom level to a fix,
predefined value. Smart Zoom is disabled. These buttons are
available in 2D mode.
Tap&hold any of the buttons to set its value to the current
zoom level, or to reset it to its original value.
Tap one of the preset buttons to set the tilt and zoom levels to
fix, predefined values. Smart Zoom is disabled. These buttons
are available in 3D mode.
Tap&hold any of the buttons to set its value to the current tilt
and zoom levels, or to reset it to its original value.
ZENEC Navigation Software shows the scale of the map in 2D
mode.
Description
If the next turn is at a distance, ZENEC Navigation
Software zooms out and lowers the view angle to show
you the road in front of you.