Selecting An Intersection As The Destination - ZENEC E GO Manual

4.
4. Enter the street name:
1. Tap
2. Start entering the street name on the keyboard.
3. Get to the list of results:
4. Instead of selecting one of the streets, tap
5. Enter the house number:
1. Tap
2. Enter the house number on the keyboard.
3. Tap
6. A list appears with the matching addresses. Tap the desired one.
7. The map appears with the selected point in the middle. Tap
menu. The route is then automatically calculated, and you can start navigating.

3.1.2.4 Selecting an intersection as the destination

The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
2. By default, ZENEC Navigation Software proposes the country/state and settlement where you
are. If needed, tap the button with the name of the country/state, and select a different one
from the list.
3. If needed, change the settlement:
To select the settlement from the list of recently used ones, tap the
To enter a new settlement:
1.
2.
3.
32
Tap
automatically.
Select the settlement from the list.
.
After entering a couple of characters, the names that match the string appear in a
list.
Tap to open the list of results before it appears automatically.
.
to finish entering the address.
Tap the button with the name of the settlement, or if you have changed the
country/state, tap
Start entering the settlement name on the keyboard.
Get to the list of search results:
to open the list of results before it appears
, .
.
.
from the Cursor
button.