Selecting An Intersection As The Destination - ZENEC GPS NAVIGATION SYSTEM Main User Manual

5. Instead of entering the house number, tap
street is selected as the destination.
6. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
location. Tap
7. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap

3.1.1.3 Selecting an intersection as the destination

To enter an address as the destination, do as follows:
1. If you are on the Map screen, tap
menu.
2. In the Navigation menu, tap the following buttons:
3. If necessary, modify the country and city/town as described earlier (page 25).
4. Enter the street name:
a. Tap
b. Start entering the street name on the keyboard.
c. Find the street you need:
The most likely street name is always shown in the input field. To accept
it, tap
to confirm the destination, or tap
to select a different destination.
and start your journey.
.
.
28
. The midpoint of the
) appears at the new
to modify route
to return to the Navigation
, .