Related Manuals for Rosslare AC-225IP PCBA
Summarization of Contents
Introduction to AC-225x Series
AxTraxNG Software System Overview
Overview of the AxTraxNG software system for access control network management.
Client-Server Architecture
Describes the dedicated server computer and database structure for AxTraxNG.
Configurable Links Functionality
Explains how to trigger outputs or alarms based on selected inputs.
Fingerprint Recognition Integration
Details integration with Rosslare's BioTrax system for fingerprint readers.
Compatible Reader Models
Lists UL-listed PIN and PROX card readers compatible with the system.
AC-225x Panel Setup Guide
Non-Supervised Input Wiring
Details the connection options for non-supervised inputs on the panel.
Supervised Input Wiring
Explains wiring for supervised inputs, including resistor placement.
Output Connections
Illustrates wiring for 12 VDC electrical release mechanisms and relay contacts.
Power Supply Configuration
Describes wiring between the PS-33 power supply and the AC-225x panel.
Wiring Communications
Provides a detailed view of the panel's wiring communications.
Reader Connection Details
Explains reader wiring, cable functions, and cable cover colors.
MD-IO84 Expansion Board
Details the MD-IO84 expansion board for adding relay outputs and inputs.
MD-D02 Expansion Board
Describes the MD-D02 expansion board for adding reader ports and inputs.
Input and Output Connections
Input Type Configurations
Covers four input types: NO, NC, supervised with 1 or 2 resistors.
Normally Open Input
Explains the two states (open/closed) of a Normally Open input.
Normally Closed Input
Details the two states (closed/open) of a Normally Closed input.
Supervised Normally Open (Single Resistor)
Describes connection and states for supervised NO input with one resistor.
Supervised Normally Open (Double Resistor)
Details connection and states for supervised NO input with two resistors.
Supervised Normally Closed (Single Resistor)
Explains connection and states for supervised NC input with one resistor.
Supervised Normally Closed (Double Resistor)
Details connection and states for supervised NC input with two resistors.
Input Descriptions
Provides descriptions for various input types and their functions.
Request to Exit (REX) Input
Explains the function and connection of the REX input for door release.
Door Monitor Input Function
Details the use of the Door Monitor input for status monitoring.
General Purpose Inputs Usage
Describes the flexible use of general purpose inputs for various functions.
Output Configurations
Explains output types, door lock configurations, and suppression diodes.
Reader and Keypad Connections
Details the connection of card readers and keypads to the access panel.
AC-225x Hardware Settings
DIP Switch Configuration Options
Explains how DIP switches control operating parameters like address and baud rate.
Access Control Panel Baud Rate
Details how to set the serial port baud rate for PC communication.
Access Control Panel Type Selection
Describes how DIP switch settings determine panel type and reader configuration.
Access Control Panel Addressing
Explains the use of DIP switches to set the panel's network address.
Communications Setup
Serial Network Connections
Covers serial communication methods using RS-232 and RS-485.
RS-232 Computer Connection
Details the wiring and limitations for connecting to a computer via RS-232.
RS-485 Computer Connection
Explains RS-485 connectivity for multiple panels and extended distances.
Daisy Chaining Configuration
Describes how to connect multiple panels in a serial chain.
TCP/IP Network Connection
Explains network communication using TCP/IP (LAN/WAN).
LAN/WAN Network Requirements
Covers requirements for connecting over local and wide area networks.
Modem Network Connection
Details how to control panels remotely using a modem.
Modem Network Hardware
Lists the required hardware for establishing a modem network connection.
Modem Connection Prerequisites
Outlines necessary steps before performing modem installations.
Computer to Modem Connection
Describes the serial connection process from the computer to the modem.
AC-225x Panel to Modem Connection
Details connecting the AC-225x panel to the modem via appropriate hardware.
Need help?
Do you have a question about the AC-225IP PCBA and is the answer not in the manual?
Questions and answers