Remote Control Unit (Rc-904) - Denon AVR-2802 Operating Instructions Manual

Multi-source recording/playback
[1] Playing one source while recording another (REC OUT mode)
1
Press the REC/MULTI button.
REC /
MULTI
(Main unit)
2
With "RECOUT SOURCE"
FUNCTION
displayed, turn the FUNCTION
knob to select the source you
wish to record.
• The "REC" indicator and the
(Main unit)
indicator of the selected
source light.
3
Set the recording mode.
• For operating instructions, refer to the manual
of the component on which you want to
record.
4
To cancel, turn the function
FUNCTION
knob and select "SOURCE".
• When "SOURCE" is selected,
the "REC" indicator turns off.
(Main unit)
[2] Outputting a program source to an amplifier, etc., in a different room (MULTI mode)
1
Press the REC/MULTI button.
REC /
MULTI
The display switches as follows
each time the button is pressed.
(Main unit)
2
With "M-SOURCE SOURCE"
FUNCTION
displayed, turn the FUNCTION
knob and select the source you
wish to output.
• The "MULTI" indicator and
(Main unit)
the indicator of the selected
source light.
• When the AVR-2802 is the
REC OUT mode, the source
MULTI
cannot be output using the
MULTI button on the
(Remote control unit)
remote control unit.
3
Start playing the source to be output.
• For operating instructions, refer to the
manuals of the respective components.
4
To cancel, turn the function
FUNCTION
knob and select "SOURCE".
• When "SOURCE" is selected,
the "MULTI" indicator turns
off.
(Main unit)
2,4 2
B
1
Display 2
REC PHONO CD TUNER DVD VDP TV / DBS
VCR -1 -2 TAPE
RECOUT SOURCE
NOTES:
• Recording sources other than digital inputs
selected in the REC OUT mode are also output to
the multi source audio output jacks.
• Digital signals are not output from the REC
SOURCE or audio output jacks.
2,4 2
B
1
SYSTEM SURROUND
TUNING SETUP PARAMETER
TITLE MENU/GUIDE
BAND RDS
CH SELECT
ENTER
MODE PTY
SELECT
MEMORY RT STATUS ON SCREEN
DISPLAY RETURN
USE/LEARN T.TONE MULTI DVD
2
SET UP
2
Display
PHONO CD TUNER DVD VDP TV / DBS
MULTI VCR -1 -2 TAPE
M-SOURCE SOURCE
NOTES:
• The signals of the source selected in the MULTI
mode are also output from the VCR-1, VCR-
2/V.AUX and CDR/TAPE recording output
terminals.
• Digital signals are not output from the multi
source audio output jacks.
[3] Remote control unit operations during multi-source playback (selecting the source)
1
Set the slide switch to "AUDIO" and "MULTI".
TAPE CDR/MD
CD MULTI
AUDIO
DVD TV
AVR/AVC VIDEO
VDP VCR
(Remote control unit)
2 Press the input Example: CD
CD
source button. 8
The multi source switches
directly.
(Remote Control unit)
The remote control unit's
MULTI button can be
operated at positions other MULTI
than "MULTI".
(Remote Control unit)
The multi source switches in
order each time the multi
button is pressed.
Multi-zone playback with multi-source
MULTI ZONE MUSIC ENTERTAINMENT SYSTEM
• When the outputs of the MULTI ZONE OUT terminals are wired and connected to integrated amplifiers
installed in other rooms, different sources can be played in rooms other than the main room in which this unit
and the playback devices are installed. (Refer to ANOTHER ROOM on the diagram below.)
NOTE:
• For the AUDIO output, use high quality pin-plug cords and wire in such a way that there is no humming
or noise.
2 MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using MULTI ZONE OUT)
ANOTHER ROOM MAIN ROOM
B
INTEGRATED AMPLIFIER
AVR-2802
ENGLISH
RC-904
START LEARNED/TX
SYSTEM CALL POWER
SET CALL OFF ON / SOURCE
DVD VDP TUNER SHIFT
1 2 3
TV/DBS PHONO
2
4 5 6
VCR-1 CD CDR / TAPE CHANNEL
7 8 9
VCR-2/V.AUX
TV/VCR
+10 0 A / B
VOLUME DISC SKIP+
DOLBY / DTS
SPEAKER SURROUND DIRECT
DSP SIMULATION 5CH / 6CH STEREO STEREO
MASTER VOL.
INPUT MODE ANALOG EXT.IN
TAPE CDR/MD
AUDIO CD MULTI MUTING
1
AVR/AVC VIDEO DVD TV
VDP VCR
SYSTEM SURROUND
TUNING SETUP PARAMETER
TITLE MENU/GUIDE
BAND RDS
CH SELECT
ENTER
MODE PTY
SELECT
MEMORY RT STATUS ON SCREEN
DISPLAY RETURN
2
USE/LEARN T.TONE MULTI SET UP
MULTI SOURCE AUDIO signal cable
SPEAKER cable
* Refer to CONNECTIONS on pages 4 to 8.
23