Using The Remote Control Unit - Denon AVR-1404 Operating Instructions Manual

ENGLISH
[9] USING THE REMOTE CONTROL UNIT
Following the procedure outlined below, insert the batteries before using the remote control unit.
Range of operation of the remote control unit
Point the remote control unit at the remote control sensor as shown
on the diagram at the left.
NOTES:
¢ The remote contro! unit can be used from a straight distance of
approximately 23 feet / 7 meters, but this distance will shorten or
operation will become difficult if there are obstacles between the
remote control unit and the remote control sensor, if the remote
control sensor is exposed to direct sunlight or other strong light, or
if operated from an angle.
¢ Neon signs or other devices emitting pulse-type noise nearby may
result in malfunction, so keep the set as far away from such
devices as possible.
Approx. 23 feet / 7m
Inserting the batteries
@ Press as shown by the arrow and slide ® Insert the R6P/AA batteries properly, as ® Close the lid.
off. shown on the diagram.
>
e Use only R6P/AA batteries for replacement.
¢ Be sure the polarities are correct. (See the illustration inside the battery compartment.)
e Remove the batteries if the remote control transmitter will not be used for an extended period of time.
battery compartment thoroughly before installing new batteries.
15